Welcome Antique Elevator Aficionado!
May 1st, 2010. Posted in Articles
This blog is dedicated to those of us who have a real appreciation for elevators. Not just any elevator but ones that bring a bit of yesterday with each vertical trip. You might call them antique, classic or turn of the century designed, we just call them cool!
Elevator and their operators where the life blood when buildings started to be built upward. They gave buildings character and warmth with a friendly, “What Floor Please” when you entered. They also usually acted as a security guard, knowing when offices were closed, tenants were on vacation and when visitors shouldn’t be on a certain floor.
This blog is made up of contributors who truly appreciate older elevators. If you are interested in becoming a contributor to this site please drop us a line at elevatorpreservation@gmail.com , we’d love to have you. If you see a photograph that you believe is copyrighted please let us know. All photographs and links are for non commercial purposes. It is not our intention to infringe on anyones copyright.
January 30th, 2012
Otis Cathode Touch Button – More Than You Ever Wanted To Know
One of the coolest buttons, perhaps developed before it’s time was the Otis “Touch” button which was motionless. This button was very common back in the 1960’s and up into the 1970’s and 80’s. Contrary to how most assume the button worked it was not heat sensitive. It actually worked on the principle of sensing a voltage change that occurred inside a glass tube. A finger touching the face of the button created this drop which then activated the the tube directly behind the button. Again, pretty darn cool and a product ahead of it’s time.
November 9th, 2011
Payne Elevator Car Switch or Someone Else’s?
I received this e-mail from George asking for more information on a car switch he purchased. It’s got a Payne Elevator Tag on it but I don’t believe that Payne was fabricating car switches back in the day. The location is Cambridge, MA and any information you can provide would be helpful. Please leave your feedback in the comments section. Cool piece and photographs.
November 9th, 2011
Need Information On Federal Elevator
November 9th, 2011
Peelle Escalators Discovered Encapsulated at Starr Building, TX
This has to be one of the coolest articles I’ve read in a while. While we often hear about elevator shaft ways being walled in only to be discovered years and decades later in old buildings and residential properties it’s not every day you read about a pair of escalators being discovered. The actual article was written by a representative from Peelle. For more information visit www.peelledoor.com but remember that they no longer make escalators as the article below points out.
For Immediate Release
Recently a pair of Peelle Escalators were discovered after being hidden by flower boxes for almost 40-years. Originally installed in 1955, the five story, 76,375 square foot building housed the American National Bank; it was the first major example of modernist architecture in Austin, TX, it included a full walled modern art mural and possibly Austin’s first escalators.
In 1971 the building was later purchased by the State of Texas for the Controller’s office. In an effort to demonstrate fiscal responsibility they suspended use of the Peelle escalators to conserve energy. The state enclosed in the escalators and built flower boxes on both levels. In a developer recently purchased the building for multi-use and renamed it The Starr Building.
During remodeling the Peelle escalators installed some 40 years earlier, long since forgotten, were discovered when the contractor removed flower boxes. They powered the Peelle escalators and they operated; the owner has contracted an elevator maintenance company so a proper evaluation and modernization can be made.
Although Peelle no longer manufactures escalators the story is a testament to the quality Peelle places on all of its product lines. For more information contact Mike Ryan @ mryan@peelledoor.com.
June 22nd, 2011
Brick & Mortar Elevator Museum Opens 6-29-2011
This month the Elevator History Museum (elevatorhistory.org) will be opening in Long Island City, New York. Founder and Curator of the museum, Patrick Carrajat, is asking for our assistance in helping preserve the history of our trade by donating any old artifacts that could be displayed at the museum. He says he already has a good collection of antique elevator components from the east coast but his west coast catalogs lacks some. If anyone has anything they would like to display at this museum please contact Patrick directly at 917.748.2328.
For more information please click the two .pdf documents below.
June 22nd, 2011
Old Elevator Button or Something Else???
Need help with this one. Looks like it might have been some type of button but was it used on an elevator and if so what was the K marking on it for? Also after a search on this building which was built in 1915 this type of button most likely wouldn’t have been used for a push button. There would have been a car switch operation or attendant around this time. http://en.wikipedia.org/wiki/Hamm_Building
From Cindy:
We were told this was an elevator control switch. Grandfather worked at the Hamms Building in St. Paul Mn, so we were thinking it might have come from there. Odd looking thing and great conversation piece! Any info would be appreciated. Thank You.
Okay elevator historians, share your ideas in the comments section below. Thanks!
June 21st, 2011
Are These Elevator Button Plates?
We received this e-mail today. If anyone has more information on this building or these plates please share it in the comments section below. Thanks!
Hello: Maybe you can help me. I have purchased 4 of what I think are elevator call button face plates. I found these at the estate sale for the old president of the State National Bank in Corsicana Tx. The lobby was remodeled about 20 years ago and I think he may have wanted to keep these as mementos. I say they are elevator plates, but they may have been for wall lights, door knobs. They spared no expense when the bank was built in the 1920’s. I am sure these are that old. I would really like to know if these did come from the elevator. I would really appreciate it if you have the time and can reply. I have included a picture of our old bank also.
Thank You, Anita
Response from Elevator Preservation:
Hi Anita! Nice to hear from you! The plates you have are exceptional and the history you have on where they came from is even more unique. Unfortunately they are not elevator call button plates and are most likely door escutcheon plates.
Push buttons, and the holes they protruded from would have had smaller holes that they would have stuck through. Closer to 5/8″ or 3/4″, which was the standard of that time period. Another item that is noticeable is that there are no mounting holes in the plate, top and bottom, that screws would hold the plate to the electrical box. Also there are four holes around the hole that would indicate another trim ring would be mounted on top and then a door knob on top of that.
Thank you so much for contacting us. Keep the history with the pieces along with the photographs. That in itself makes the plates more valuable!
Tom Sybert
ElevatorPreservation.com
6/21/2011 – Jon was nice enough to share the following pictures from the machine room. How cool! Thanks Jon!
Jon
May 16th, 2011
Titche-Goettinger Building Elevator Rediscovered
I’m doing some research on an Otis elevator installed in 1929 for the Titche-Goettinger department store in Dallas, Texas. The elevator features a manual control system and folding bench. During a 1950s renovation the interior of the cab was redecorated and the ceiling lowered with the addition of a fan (the original moulding can be seen above the later ceiling. The walls are currently a green vinyl. Originally there were 8 elevators; 4 were removed when escalators were added in the 1950s and only 2 remain in operation today (the building now houses apartments and a university). In the mid-90s elevator #1 was raised from the basement and welded into place but was never renovated due to lack of funds. It remained sealed and forgotten until now.
In celebration of the building’s history volunteers would like to clean it up to a “displayable” condition. We’re looking for any information about reproduction parts (a stool), cleaning suggestions and knowledge about the functionality of the different controls/switches. I’ve included some recent photos and a Dallas Morning News article from November 1930.
The building was listed to the National Register of Historic Places and is getting a plaque to celebrate the occasion. It will include hosting a community history day and open house in June to tour some of the old areas in the building (and hopefully some of the old store employees will attend). The old elevator was recently “rediscovered” by new staff and the residents (of which I am one) have volunteered to clean it up for the event. Initially it just needs a good scrubbing for the event, but we could use that opportunity to raise donations for a more thorough cosmetic restoration. I along with many other residents have never seen a manually controlled elevator like this, so it’s very interesting. Old articles report a team of 13 women who operated them up until the store’s closing.
It’s obvious the elevator has been modified over time. When a major store expansion occurred in the 1950s the interior of the elevator was “modernized”. There’s no telling if there is anything original left under the green vinyl panels, but the 1950s style is still interesting. There’s currently no power or lights inside the cab. The elevator penthouse still has all of the original machinery, and even contains a big board with all of the original tools in place. The 2 remaining elevators were completely modernized in 1997.
Need assistance in refurbishing elevator equipment. If you can assist please comment in space below.
May 2nd, 2011
Forget Ebay When Buying or Selling Your Elevator Parts!
Forget Ebay, it’s become an over glorified place for power sellers to list anything and everything! Go ahead, do a key word search for “elevator”. You’ll find more elevator shoes, dental instruments and yes, some type of gynecological tool that should not be shown let alone sold online.
If you are looking to purchase an old elevator or old elevator equipment there’s a place for you. If you’re looking to sell old elevator equipment, there’s a place for you. The best part is that it’s free! Yes, 100% free. Go ahead; post an online auction item, a classified ad, a barter/trade item! Have fun with it and use it till your heart’s content!
March 29th, 2011
Can You Identify This Old Part?
These photos and e-mail were sent by Kim W. She asked “What the heck is it”? While it looks like it may have been a car switch there don’t appear to be enough contacts to control a motor. Typically you’d have at least two in both up and down directions at a minimum. Some had 10-12 which are still available over at www.cjanderson.com . Cutler Hammer back in the day manufactured elevator parts and actually had C.J. Anderson fabricate many of the switching devices that they sold under the Cutler Hammer name. No longer are these parts available from Cutler Hammer C.J. Anderson still fabricates many of them still today.
The actual e-mail and photos are below. If you know what this is or would like to share your opinion of what it might be please comment below.
I have an item that I don’t know what it is, does it have a value, are there collector’s for this type of item?, etc.
I am hoping that if I can give you a description and what little info I have gotten, you can answer some of my questions, or point me in a direction that could help me.
This item is made of a heavy metal. It is black, round, has a single electrical cord attached, it has a handle that turns the center section, I think…
There is a metal plate on this item and here is the information on that metal plate:
_______________________________________
THE CUTLER-HAMMER MFG. CO.
Milwaukee, Wis.
volts: 110 MAX AMPS: 10 – 2.5
16 C.P. LTS. 20 CAT NO 24115
SER NO. 682805 PAT’D FEB. 27, 1899
******I was told that it possibly had something to do with elevators so that is why I have contacted you.
Any information that you can share with me would be greatly appreciated.
Sincerely,
Kim W.
Latest Comments